Pixie Firmware: Release Notes =================================================================== v1.15 (updated Oct/2017) - Fixes standalone show bug. (will not start when DMX input is connected) - Must be used with PRO-Manager 2.40 and above to change any settings =================================================================== v1.14 (updated Jan/2017) - Added support for ENTTEC 9PODT protocol - Must be used with PRO-Manager 2.40 and above to change any settings =================================================================== v1.13 (updated Oct/2016) - Fixes DMX Input bug (while using both inputs) - Must be used with PRO-Manager 2.35 and above to change any settings =================================================================== v1.12 (updated April/2016) - Supports RGBW Ordering modes (use 4 DMX Slots) - Standalone mode also supports 512 DMX Slots in RGBW modes - Must be used with PRO-Manager 2.35 and above to change any settings - Firmware available within latest release of PRO-Manager =================================================================== v1.11 (updated July/2015) - Supports revB Pixie hardware - Added new "blackout option": if enabled, loss of DMX and USB for 30 secs, will result in blackout of led output (is disabled by default) - Must be used with PRO-Manager 2.30 and above to change any settings - Firmware available within latest release of PRO-Manager =================================================================== v1.10 (updated Dec/2014) - added support for changing DMX Start Address (DMX1 and DMX2) - DMX Start address range is 1,4,7,10 ... 508 - Pixel group size increased up-to 170 - Firmware available within latest release of PRO-Manager =================================================================== v1.8 (updated March/2014) - added support for APA-104 protocol - minor bug-fixes =================================================================== v1.6 (updated 04/Oct/2013) - resume show playback on dmx-loss option (3 sec timeout) =================================================================== v1.5 (updated 16/Sep/2013) - RGB re-ordering support, can be set in any of 6 options - RGB order affects DMX,USB and standalone mode =================================================================== v1.4 (11/Sep/2013) - DMX Personality support (2 options available) Basic DMX mode 1: DMX1 output to Strip1 Universe1 + Universe2 (repeated). DMX2 output to Strip2 Universe1 + Universe2 (repeated). i.e. Strip1 = DMX1, DMX1. Strip2 = DMX2, DMX2. Basic DMX mode 2: DMX1 output to Strip1/2 Universe1 (repeated), DMX2 output to Strip1/2 Universe2 (repeated). - i.e. Strip1 = DMX1, DMX2. Strip2 = DMX1, DMX2. - LED grouping support (upto 6 led can be grouped into DMX addressing) Allows users to run a 300 led strip with just 1 DMX uiverse =================================================================== v1.3 (Aug 2013) - Standalone bug fix - USB Mode fix